Roller coat wall texture
Sub-segments Available
Roller coat texture is the most popular exterior grade water repellent coating that offers outstanding resistance and vapour permeability properties. Formulated from quartz powder with a maximum grain size of 0.3mm.
The Roller coat texture contains acrylic polymer & special biocides in water dispersion, which guarantee excellent resistance to climatic Condition, leave unaltered the transpiration of the surface, and prevent the development of moulds and algae. Furthermore, the product is resistant to acids and frost haw cycles.
Contact us today to request the official technical, design and application catalogue for our wall texture products.
Fine stippled roller coat texture with excellent protective coverage.
Structured stippled finish showing medium-grain quartz texture pattern.
Classic orange peel roller texture with soft aggregate peaks.
The surfaces must be completely dry and mature, new plaster must be mature at least 30day in order to consent the carbonization process. Clean the surfaces to be decorated and remove loose or flaking materials. In case of new plasters, make sure the substrate is thoroughly dry. In case of restoration works Rectify large water infiltration or leaks. Allow the wall to dry, use Cemplast for patch repairing & primer. Allow the primer to dry for 12 hours then apply the finishing products.
Applications
Documents
About this category
Roller coat wall texture
Premium water-repellent roller finish with durable quartz grain binder.
The temperature of the substrate should be 5oC minimum and 36oC maximum (relative humidity not higher than 80%). No seepage on the surface, and weather must be dry during application.
Short hair flat brush, medium- grain sponge, cloth pad & Primer.
Mixing Ratio (volume) Single Pack, Thinner/Cleaner Water.
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. Good Ventilation (Free circulation of air), Typical film thickness, One coat on top of inert substrate, Relative humidity 75%. The surface should be dry and free from any contamination prior to application of the subsequent coat. The given data must be considered as guidelines only.
Chemivon Industries is a leading manufacturer of premium specialty chemicals, polymer emulsions, industrial binders, and custom formulations.
