Rustic architectural wall texture
Sub-segments Available
Rustic is a finish aggregating Quartz ranging 100 mesh to 10 mesh & Dolomite, dispersed in silicon acrylic medium aided with high performance fungicides and Biocides.
Applications
Documents
Rustic contains in built web like structure of synthetic fibres which gives better anchoring & abrasion resistant properties, making the film crack resistance & eliminates the possibility of peeling off, even under extreme dampened conditions.
To be used on exterior surface. It can be used on interior surfaces of cement plaster, gypsum board and woodwork. It is easy to apply and provides grooved pattern in varied directions, like vertical/horizontal/jumble up.
Grades Product Thickness (mm) Spreading(Covering of Product)
| Grades | Product Thickness (mm) | Spreading(Covering of Product) |
|---|---|---|
| Fine | 1.5mm | 80 sq.ft. per bag |
| Regular | 2.0mm | 70 sq.ft. per bag |
| Sumo | 2.5mm | 60 sq.ft. per bag |
Theoretical spreading rate – Depending on thickness applied
Colour: White/Natural colours: Solids (vol %) 65% +/- 2%.
Contact us today to request the official technical, design and application catalogue for our wall texture products.
Off-white textured surface with a delicate vertical grooved scratch pattern.
Light brown/tan textured finish showing a rich, jumbled/random grooved pattern.
Light gray/beige textured surface displaying thick vertical & horizontal grooves.
Light olive/yellow-green-beige textured surface with diagonal grooved scratch marks.
The surface must be sound, clean, dry, free from dust, oil, grease and laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be removed by stiff bristle brushing. Repair all cracks and patches with Cemplast.
The temperature of the substrate should be 10 Centigrade minimum and 40 Centigrade maximum. No seepage on the surface, and weather must be dry during application.
The product must be stored in accordance with national regulations. The product must be kept in a cool and well-ventilated place, protected from heat and direct sunlight. Containers must be kept tightly closed.
Drying times are generally related to air circulation, temperature, film thickness and number of coats, and will be affected correspondingly. • Good Ventilation (Free circulation of air) • Typical film thickness • One coat on top of inert substrate • Relative humidity 70%. The surface should be dry and free from any contamination prior to application of the subsequent coat. The given data must be considered as guidelines only. The actual drying time may be shorter or longer, depending on thickness, atmosphere, humidity, underlying paint system, requirement for early handling and mechanical strength etc. A complete system can be described on a system sheet, where all parameters and special conditions could be included.
Packing Size: 25 Kg's Packing may vary from place to place according to local requirements.
About this category
Rustic architectural wall texture
Chemivon Industries Private Limited
Plot No. 16 to 19, New Valeshwar Textile Park, Opp. Orange Textile Park, Lidinyad Surat -394110, Gujarat, India+91 99799 12003
Chemivon Industries is a leading manufacturer of premium specialty chemicals, polymer emulsions, industrial binders, and custom formulations.
Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.
